General techtip: 3D printed knuckle and bushing/bearing for RC car
3D printed knuckle and bushing/bearing for RC car: We found that overtime the bushing/bearing will…
0 Comments
3d printing techtip: material feeding partially clogged
The material feeding line may be partially clogged, leading to print quality issue like what…
0 Comments
Techtip: about the use of screw without screw nut
When you use a small screw on a 3d printed part without a screw nut…
0 Comments
3d printing techtip: wall thickness
Parts that are subject to stress and impact should be modeled to have reasonable thickness…
0 Comments
3d printing techtip: improper bed leveling
This is what will happen if you replace the pad on the print bed but…
0 Comments
3d printing techtip: Excessive stringing when printing PETG
Retraction distance is what determines how much plastic is pulled out of the nozzle. The…
0 Comments
3d printing techtip: nozzle types
The two most common nozzle types for 1.75 filament are MK8 and E3D V6. They…
0 Comments
3d printing techtip: Is support always required for overhang?
Is support required for large object with overhang? In this example, I accidentally forgot to…
0 Comments
Techtip: printing RC structural parts using PLA
When printing anything structural you should choose at least 50% fill, which will take hours…
0 Comments
Techtip video: securing the nozzle
If the heat block assembly or the nozzle is loose, one quick and easy way…
0 Comments