10mm outer diameter bushing (3mm thickness) for TT02 and others

This bushing is specially designed to address the problem of a very tight wheel. Ever come across a situation where the wheel is getting difficult to spin after tightening up the wheel nut? This usually occurs after changing the wheel adapter or the hub carrier. Adding spacers will only make things worse!

Chance is that the inner side of the hub carrier where the bearing sits is slightly thicker than usual (please refer to the photo below).

You cannot make a ball bearing “thinner”. And it is very difficult for you to modify the hub carrier. This is where a plastic bushing can come to the rescue. We designed this bushing which is 1mm thinner than the standard one, which should help you solve the problem.

The outer diameter is 10mm. The inner diameter is 5mm. Thickness is 3mm.