Techtip video: securing the nozzle
If the heat block assembly or the nozzle is loose, one quick and easy way…
0 Comments
General Tech Tips
Tech tips for beginners We use polylactic acid PLA plastic filament for printing these models…
0 Comments
Techtip video: Delta printer
A delta 3d printer has almost all the electronic stuff including the circuitry and the…
0 Comments
Techtip video: temperature sensor problem
When smoke is coming out of the print head, chance is that the print head…
0 Comments
A Practical Guide to Operating and Maintaining a Cartesian FDM 3D Printer
Different 3D printers have slightly different features. In the world of Fused Deposition Modeling FDM…
0 Comments
Special purpose bearing for vintage Bandai Intercepter
Special purpose bearing for vintage Bandai Intercepter, 12mm bearing, 5mm shaft dimension: These are for…
0 Comments
Proper leveling and bed adhesion
Poor adhesion and warping are the worst nightmare. Setting extrusion temperature and hot bed temperature…
0 Comments
Unbox and configure the Kingroon K3P
Unbox the Kingroon KP3 3D printer. This printer can be used with the latest Cura…
0 Comments
Trim Tab for 65cm+ RC Boat (FT010, FT011 and the like…)
Trim Tab for 65cm+ RC Boat (FT010, FT011 and the like...) upgradeparts-rcboat-trimtab-ft010011
0 Comments
Replacement rudder for FT010/FT011
Replacement rudder for FT010/FT011: upgradeparts-rcboat-rudder-ft011-mod This is a slightly shorter version for shallow water (approx.…
0 Comments